Lubrication matters. But do you know how much?
For every industry, lubrication is vital to the performance of rotating equipment; when over 40% of maintenance cost are related to poor lubrication, proper management is crucial. The right quantity of the right lubricant applied at the right intervals is essential to achieving optimum application performance and maximum service life.
Together, SKF and Lincoln combine more than 300 years of experience in managing lubrication and reducing friction. And with our pioneering RecondOil process technology for uncompromised industrial oil regeneration, you can reuse your oil over and over again.
No matter where in the lubrication management journey you are, with SKF you can boost the performance that matters to your business. Find out how.
- Recently launched
- Lubricants - Lubricators - Manual lubrication tools
- Automatic lubrication systems
- Lubrication system components
- Solutions for specific industries
PRODUCTS
Developed for pre-lubrication applications using oil and fluid grease, this metering device is simple to install utilizing plastic or metallic lines and can be mounted in either an upright or inverted position. It also features easily identifiable...
View More >
The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately 15 meters. It includes an integrated...
View More >
The SKF Lincoln SLC metering device features a modular design and offers easy configuration to meet your needs, including different output quantity, fitting and adjustment options.
View More >
LRM2 lubrication remote monitor monitors lubrication systems that cannot be checked daily due to the nature or position of the specific application. Compatible with oil or grease, the monitor can be used on single-line, dual-line and progressive...
View More >
PRODUCTS
Poor lubrication accounts for over 36% of premature bearing failures. SKF lubricants are designed for your needs and tested for performance in real applications.
View More >
Automatically supply a small quantity of clean grease or oil to a lubrication point on a regular basis, thus improving bearing performance.
View More >
The SKF manual lubrication tools are specifically designed and selected to support lubricant storage, handling, dosing, labeling, analyzing and applying lubricants.
View More >
PRODUCTS
For oil, fluid grease and grease up to NLGI 3. For applications in machine tool, textile or printing (oil and fluid grease) and for heavy applications like mining, food and beverage, construction (grease).
View More >
For oil, semi-fluid grease and grease up to NLGI 2. For heavy applications like pulp and paper, mining and metals. Up to 2000 lubrication points over long distances up to 120 m.
View More >
For oil or grease. Simple, accurate and reliable. Meet ATEX and API standards in the oil and gas industry. 1 to 30 outlets.
View More >
For oil, semi-fluid grease and grease up to NLGI 2. For use on small- to medium sized machines with dispersed lubrication points that require varying lubrication quantities. Delivers frequent and measured amounts of lubricant to each lubrication...
View More >
Designed primarily for oil circulation lubrication to lubricate as well as cool highly stressed bearings in nearly every size of machine. Additionally, the returning oil removes and filters out wear particles from friction points and prevents corrosion damage by removing air and water from bearings.
View More >
For high-speed spindle bearings, chains and special applications in the steel industry.
View More >
For high-speed cutting processes. Improves ecological and economic efficiency. The principle is simple - lubricant is applied to the tool’s cutting edge as an aerosol in the exact amount required. Using MQL, lubricant consumption is measured in millilitres per hour instead of litres per minute.
View More >
Effective lubrication is key to maximize chain life in order to keep your chain and conveyor processes moving. Air-assisted and airless oil projection system. Oil applicators. Grease injection. Agriculture machines.
View More >
Virtually maintenance free, reducing total cost of operation. Reducing manual lubrication results in fewer potential accidents.
View More >
For large 2- and 4-stroke diesel engines. Can reduce oil consumption from 30 to 50 percent.
View More >
For open gear drives in jacking systems, mining and cement industry and more. Sprays grease directly on the gear teeth.
View More >
To increase wire rope life and reduce lubrication time. The life cycle of a steel wire rope that has been periodically lubricated is approximately six to eight times longer than a wire rope that has not been lubricated.
View More >
For conveyors in the beverage industry. Improves safety, quality and efficiency by eliminating water and soluble lubricants.
View More >
By delivering precise amounts of lubricant directly to the rail/wheel interface, automatic lubrication systems provide significant benefits in terms of wear, energy and noise reduction.
View More >
PRODUCTS
For all types of lubrication systems. For oil, fluid grease and grease. Different drive options. With or without reservoir.
View More >
Deliver preset lubricant dosages to lubrication points. For all types of lubrication systems. For oil, fluid grease and grease.
View More >
Various devices that generate a visual or electrical signal. For all types of lubrication systems. Switches. Sensors. Transmitters. Valves.
View More >
For all types of lubrication systems. To monitor the well function of a lubrication system.
View More >
Applicators, filters, fittings, pipes. For all types of lubrication systems.
View More >
Medium- and high-pressure pumps used for pumping grease, oil and other fluids.
View More >
For oil circulation lubrication systems. Wide range of customized and turnkey solutions for flow rates from 0,1–3 000 l/min.
View More >
For internal and external MQL. SKF LubriLean units and SKF Vectolub units.
View More >
Can be supplied as a complete unit (model OLA) or individually. Mixing valves with or without metering.
View More >
For small delivery rates from 3 to 30 mm3. Micro pumps. Injection oilers. Microdosage system.
View More >
Filling centralized lubrication systems from a central source makes lubrication maintenance easy. The pumps fit on standard grease or fluid grease drums.
View More >
PRODUCTS
With an automatic lubrication system installed on your construction machines, you know that bearings are receiving the right amount of lubricant at the right time. There is also no need to stop the machine for relubrication.
View More >
Efficient lubrication is critical for each rotating machine component, and chains and conveyors need special treatment. Independent from your final product, SKF lubrication solutions support all moving parts in your machines.
View More >
Fleet maintenance can be performed more efficiently and safely with automatic lubrication systems. Providing lubrication solutions for all types of vessels, SKF helps to optimize your marine operations.
View More >
Upstream, midstream or downstream, SKF supports you in every phase by providing automatic lubrication systems that are tailored to the specific characteristics of the job. Class-approved and ATEX- or ICE-certified products for all applications are available upon request.
View More >
By delivering precise amounts of lubricant directly to the rail/wheel interface, automatic lubrication systems provide significant benefits in terms of wear, energy and noise reduction.
View More >
Automatic lubrication systems provide lubricant supply more reliably and precisely to moving components in the nacelle. The result is optimized bearing service life over the long term, more turbine uptime and reduced manpower costs.
View More >
IN FOCUS
System reboot
Remanufacturing in wind energy is a relatively new phenomenon. When remanufacturing is mentioned in the sector, most...
View More >